If you're experiencing excessive vibration in your engine/blower unit, there are several potential causes that should be checked immediately. For safety, always disconnect the spark plug wire before performing any inspection.
Common Causes and Solutions
Loose Impeller Bolt
Disconnect spark plug wire
Look inside blower housing
Check if impeller bolt is securely fastened
Tighten if necessary
Damaged Impeller Blade
Disconnect spark plug wire
Inspect each blade through blower housing
Look for any signs of damage
Contact us for replacement if damage is found
Impeller/Hub Separation
Disconnect spark plug wire
Check center of impeller
All components should be concentric (like a bullseye):
Edge of impeller
Washers
Bolt
If not properly aligned, replacement is needed
Safety Note
Always disconnect the spark plug wire before performing any inspection or maintenance on your Cyclone Rake.
Have Questions? We're Here to Help! Our team is always happy to assist. Whether you'd like to call us at 888-531-7253, schedule a callback, or send us a message through our Contact Us form, we're ready to help!