Using the 3rd Wheel Jack Stand: Important Removal Instructions

The 3rd Wheel Jack Stand is a handy accessory that supports your Cyclone Rake when it's detached from your mower. However, there's one critical thing to remember: you must remove the Jack Stand before operating your Cyclone Rake.

Important Safety Information

The 3rd Wheel Jack Stand is designed for storage purposes only. It provides stable support for your Cyclone Rake when:

• Storing between uses

• Performing maintenance

• Connecting to or disconnecting from your mower

Warning: Remove Before Operation

Attempting to operate your Cyclone Rake with the 3rd Wheel Jack Stand still attached will result in damage to both the stand and potentially your Cyclone Rake. The stand is not designed to withstand the forces of operation and movement across your property.

Replacement Handle Information

If you've lost the handle for your 3rd Wheel Jack Stand, don't worry! You can use a 3/8" socket as a replacement. This standard size socket works perfectly with the jack stand mechanism and is readily available at any hardware store.

Quick Removal Checklist

Before starting your Cyclone Rake, always check that:

• The 3rd Wheel Jack Stand has been completely removed

• The stand is stored in a safe location where it won't be damaged

• All other pre-operation checks have been completed according to your owner's manual

Storage Recommendations

When not in use, store your 3rd Wheel Jack Stand in:

• Your garage or shed with your other Cyclone Rake accessories

• A dry location to prevent rust or corrosion