Fixing MDA Y-Adapter Gaps: Step-by-Step Adjustment Guide

How to Eliminate a Gap Between Your Mower Deck and Y MDA

If you notice a gap between your mower deck and the Y Mower Deck Adapter (MDA), a simple hardware adjustment can fix the issue. This gap typically occurs when the mounting hardware isn’t positioned optimally on your mower deck.

📷 Before Adjustment: The first image shows the gap present between the mower deck and the Y MDA /

.

📷 After Adjustment: The second image demonstrates a flush fit after completing the adjustment steps.

Step-by-Step Adjustment Process:

1️⃣ Remove the MDA assembly

• Unscrew the two MDA clamp knobs

• Carefully lift the MDA assembly off the mounting studs

2️⃣ Loosen the deck plate bolts

• Locate the two bolts securing the smaller plate to your mower deck

• Loosen them slightly to allow for adjustment

3️⃣ Adjust the plate position

• Find the end of the plate where the studs protrude

• Rotate it clockwise until you feel resistance (the plate will have some natural play)

4️⃣ Secure the adjustment

• While holding the plate in its maximum clockwise position, tighten the deck bolts firmly

5️⃣ Reattach the MDA assembly

• Place it back over the mounting studs

• The gap should now be eliminated, ensuring a flush fit

Expected Result:

After completing these adjustments, you should see a flush fit between your mower deck and the Y MDA, ensuring optimal performance of your Cyclone Rake.

If you need more information on the installation of your Y MDA, you can find the instruction sheet by clicking here, Y MDA Instructions.