Installing a 5-Blade Impeller into a Smaller Housing

If you're upgrading your Cyclone Rake with a 5-blade impeller or replacing an existing one, you might find that fitting it into the smaller blower housing requires some extra effort. Don't worry this is normal, and with the right technique, the impeller will fit properly.

Why It Might Seem Tight

The 5-blade impeller is designed to maximize vacuum performance in your Cyclone Rake, and its precise dimensions ensure optimal airflow. The snug fit is intentional to maintain proper clearance and performance.

Installation Tips

When installing your 5-blade impeller into a smaller housing:

• Make sure the blower housing is clean and free of debris

• Align the center hole of the impeller with the engine shaft

• Apply firm, even pressure while working the impeller into position

• It's normal to need some "elbow grease" during this process

• Ensure the impeller is seated properly before securing it

Proper Alignment

Correct alignment is crucial for proper operation:

The impeller must be centered on the shaft

• All blades should have equal clearance from the housing

• Once installed, the impeller should rotate freely when turned by hand

Video Instructions

Here is link to a brief video showing how to install the 5-blade impeller:

How To Install 5 Blade Impeller Video - YouTube