If you’re upgrading your Cyclone Rake 3rd Wheel Jack Stand with the new 5-inch replacement wheel (Part #01-01-1718), you may run into one of two common situations. Don’t worry—they’re easy to fix, and we’ll walk you through both.
1. Replacing an Old 3-Inch Wheel: Missing the Thin Wrench?
If your Jack Stand originally came with a 3-inch wheel, you’ll need to remove the old hardware before installing the new 5-inch wheel.
Wrench Included for the New Wheel: The 5-inch wheel kit comes with a wrench for installing the new wheel.
Need to Remove the Old One? If you don’t have the original 22 mm thin wrench that came with your 3-inch wheel, you can pick one up online.
Order a Replacement Wrench: A compatible wrench is available on Amazon here:
👉 22 mm Thin Wrench on Amazon
These slim wrenches are often used for angle grinders and work perfectly for this purpose.
2. Ground Clearance Issue? Here's the Fix.
If the new 5-inch wheel doesn’t clear the ground properly or seems off-kilter, it usually means your mower’s hitch bar sits lower than standard. That can keep the Jack Stand from leveling out.
Simple Solution: Extension Plate (Part #01-01-2084)
This handy plate allows you to mount your 3rd Wheel Jack Stand a little higher, giving you better clearance and helping your Cyclone Rake ride smooth and stable.
Order the Extension Plate: You can add it to your cart right from our website.
👉 Click here to order the Extension PlateEasy Installation: You’ll find full instructions here:
👉 3rd Wheel Jack Stand Extender Bracket Installation Guide
The install is simple and only takes a few basic tools.
Final Tip:
Whether you’re swapping wheels or adjusting clearance, it’s a good idea to keep all your installation tools handy for future maintenance. A few minutes now can save you hassle later.
Have Questions? We're Here to Help!
Our team is always happy to assist. Whether you'd like to call, schedule a callback, or send us a message through our Contact Us form, we're ready to help!